ESXi on Raspberry Pi 4
Recently I stumbled across a video that described how to put ESXi 7 on a Raspberry Pi 4. It seemed like a cool thing to try so I went out and looked in my...
Computer Setup and Maintenance / HOWTOs / Linux / Tech / virtualization
by ogwatermelon · Published March 28, 2021
Recently I stumbled across a video that described how to put ESXi 7 on a Raspberry Pi 4. It seemed like a cool thing to try so I went out and looked in my...
administration / creativity / Info / networking / scripting / Tech / Windows
by ogwatermelon · Published November 10, 2020
So my job has me travel around to remote sites and over see setup of events that can support several hundred computer systems at three to five sites. Once the setup is complete I...
My Swarm cluster has now been up and running since December of 2019 with only a few problems. Below are the problems I ran into after 8 months of 24/7 usage: loss of 2...
I was looking for a simple remote access program that I could use to access my servers to do work on them from pretty much any computer I was using. I stumbled across this...
administration / Info / Linux / OS / Tech
by ogwatermelon · Published March 14, 2020 · Last modified March 31, 2020
Well today is close to two months that my Pi cluster has been up and running. For the most part it has worked without any issues. Once Portainer was up and running I went about installing the different functions I wanted to have on each node. The first thing I thought of was a new Nagios container. I have used Nagios on my own network and at a data center where I worked. This was by far the most difficult of the installs. To get the current version you have to build it from source and then go about configuring. Here is an old but good guide to building a Nagios server.
Follow: