Bit lost
I completely agree with this article, I pay for 22Mbps download speed and I’m lucky to get 13Mbps. Read it this is a good article from the BBC.
WHO, WHAT, WHY
The Magazine answers…
Broadband users aren’t getting the speeds they are paying for, says Ofcom. One reason is because the signal degrades over distance when sent through copper wires, so where do the missing megabits go
To many people around the UK the results of Ofcom’s broadband speed survey came as no surprise when it was published this week.
The telecoms regulator says broadband customers are not getting the speeds they are paying for. Nearly one fifth of those on an eight megabit per second (Mbps) connection actually receive less than 2Mbps.
It also says the speed of broadband delivered through traditional copper wires – rather than faster fibre-optic cables – is slower the further away you are from your telephone exchange. So where do the missing megabits go
They aren’t lost in the way that you would lose water pressure through a leaky water pipe. The extra megabits per second you are paying for and not receiving are usually never given in the first place, say experts.
THE ANSWER
- The Megabits you pay for are never given in the first place
- Broadband connection is decided by the “sync speed”
- This is decided before signal leaves the telephone exchange
Broadband rates ‘not up to speed’
In most cases the speed of your broadband ADSL connection is set from the start, it doesn’t get slower or faster. So if it’s only 2Mbps then that’s the speed it was sent out from your local telephone exchange, even if you paid for a faster connection.
Several factors decide this rate but the main one is “sync speed”, says Richard Shaw from SamKnows, a broadband measurement site and Ofcom’s technical partner.
Broadband works best on a stable line and “sync speed” is the most stable speed possible on your line. It is calculated between the exchange and the ADSL modem in your home before the connection is fully established and working.
“You could think of it like a greeting between two people at the start of a phone call before the main conversation starts,” says Mr Shaw.
There are two factors that decide “sync speed”. The first is line attenuation, which is the natural loss of the signal due to the distance you are from an exchange.
This is the most referred to factor in broadband quality because a signal sent through copper wires degrades over distance. Quite simply the further you are from an exchange, the longer the copper wire used and the worse the signal.
The second factor is signal to noise ratio (SNR). This is the quality of the electrical signal being transmitted through the wiring and how it compares to the electrical interference.
Such noise on a line blocks and reduces the amount of broadband signal that can get through. The greater the signal that can get through the more stable the line is, which also taking in the attenuation can lead to faster speeds.
“It’s like a phone call with lots of noise in the background, you only might be able to hear half of what the other party is saying, whereas with no noise you can hear everything,” says Mr Shaw.
Once these two calculations are done the fastest, the most stable speed at which the signal can be sent from the exchange is decided. So, rather than megabits being lost along the line – they “lost” megabits are never sent in the first place.
WHO, WHAT, WHY
A regular part of the BBC News Magazine, Who, What, Why aims to answer some of the questions behind the headlines
Other much smaller factors that affect speed include using cheap hardware and using phone extensions which introduce interference.
Broadly speaking, standard ADSL can work up to 5km from an exchange, says Janusz Jezowicz, a director of BroadbandSpeedChecker. However, to get 8Mps you would need to be located no further than 2km from an exchange.
Frustratingly, it is very difficult – if not impossible – to find out how far you are from your closest exchange in terms of copper wire length, he adds. This means it is hard to make an informed decision about what broadband package it’s worth buying. After all, who wants to fork out money for 8Mps if you can only get broadband at 2Mphs.
“Distances apply to cable length and BT Wholesale does not publish how the cables are laid out on our streets,” says Mr Jezowicz.
“You can find out your distance from the exchange on various websites but it will give you distance as the crow flies, not the actual cable length which in most cases is much longer.”
There are devices that can improve broadband signal quality, these are called micro-filters and many consumers have them fitted in their homes.
This article is from the BBC News website. © British Broadcasting Corporation, The BBC is not responsible for the content of external internet sites.
