Proxmox VE 8 Cluster
I decided in November that I was going to move away from VMWare and on to an open source hypervisor. Some of the systems I was using were getting to be several...
Tagged: Linux
ESXi on Raspberry Pi 4
Recently I stumbled across a video that described how to put ESXi 7 on a Raspberry Pi 4. It seemed like a cool thing to try so I went out and looked in my...
Raspberry Pi Docker Swarm cluster 8 months later
My Swarm cluster has now been up and running since December of 2019 with only a few problems. Below are the problems I ran into after 8 months of 24/7 usage: loss of 2...
Raspberry Pi 4 SSD Boot
Well first off the title is wrong, you can’t boot from an SSD yet on R Pi 4. However this will help you put the root partition on a USB 3 drive. So I...
Docker PI Cluster
Well today is close to two months that my Pi cluster has been up and running. For the most part it has worked without any issues. Once Portainer was up and running I went about installing the different functions I wanted to have on each node. The first thing I thought of was a new Nagios container. I have used Nagios on my own network and at a data center where I worked. This was by far the most difficult of the installs. To get the current version you have to build it from source and then go about configuring. Here is an old but good guide to building a Nagios server.